Guia de Tamanhos para Rompedores de Escavadeira
Encontre o rompedor hidráulico certo para sua escavadeira. Guia completo por classe de tonelagem — de mini-escavadeiras de 1 tonelada a máquinas pesadas de 50 toneladas.
5
Tonnage Classes
34
Compatibility Entries
8
Excavator Brands
Tabela de Correspondência Rompedor-Escavadeira
Encontre o peso operacional da sua escavadeira e combine com o modelo de rompedor recomendado.
Peso da Escavadeira → Rompedor Recomendado
Hydraulic Matching Diagram* O peso do rompedor deve ser aproximadamente 8–12% do peso operacional da escavadeira. Sempre verifique a compatibilidade de vazão hidráulica e pressão.
Regra Principal
O peso do rompedor deve ser 8–12% do peso operacional da escavadeira. Isso garante que a máquina portadora possa lidar com o acessório sem estresse estrutural.
Compatibilidade Hidráulica
Verifique se a vazão hidráulica auxiliar (L/min) e a pressão (bar) da escavadeira correspondem aos requisitos do rompedor. Vazão insuficiente = desempenho reduzido.
Fator de Aplicação
Trabalho em rocha dura e alta produção pode justificar um rompedor ligeiramente maior. Concreto leve e abertura de valas podem usar um modelo menor para melhor manobrabilidade.
Navegar por Classe de Tonelagem da Escavadeira
Selecione a classe de peso operacional da sua escavadeira para orientação detalhada.
Tabela de Compatibilidade Completa
Todas as classes de escavadeiras e seus modelos de rompedor recomendados em um relance.
| Classe de Escavadeira | Modelos Recomendados | Vazão de Óleo | Pressão | Detalhes |
|---|---|---|---|---|
| 1–4 toneladas | 20–50 L/min | 100–150 bar | Ler Mais → | |
| 5–10 toneladas | 45–90 L/min | 120–170 bar | Ler Mais → | |
| 11–20 toneladas | 70–130 L/min | 140–180 bar | Ler Mais → | |
| 21–30 toneladas | 150–200 L/min | 160–200 bar | Ler Mais → | |
| 31–50 toneladas | 150–250 L/min | 160–210 bar | Ler Mais → |
Precisa de ajuda com uma máquina específica?
Nossa equipe de suporte técnico pode ajudá-lo a encontrar o rompedor certo para sua escavadeira.
Browse By Application
Select your primary application to identify the correct excavator weight class and breaker category.
Common Sizing Mistakes
Six systematic errors that account for the majority of premature hydraulic breaker failures — each a mismatch between machine capability and breaker specification.
Oversized Breaker on Small Excavator
CriticalFitting a breaker heavier than 10% of excavator operating weight shifts the machine's centre of gravity forward, reducing stability and increasing tipping risk on slopes. Excessive front-end load also accelerates boom and arm pin wear.
Consequence
Structural damage to boom, premature pin/bushing failure, machine instability
Engineering Rule
Breaker weight ≤ 10% of excavator operating weight
Ignoring Hydraulic Flow Compatibility
CriticalInstalling a breaker without verifying the excavator's auxiliary circuit flow rate against the breaker's rated range is the single most common cause of premature seal failure. Both over-flow and under-flow conditions are damaging.
Consequence
Seal failure within 200–500 hours, overheating, reduced impact energy
Engineering Rule
Always match breaker rated flow to excavator auxiliary circuit output
Using Mining Breaker for Trench Work
High RiskHeavy-class breakers (21–50 t) are engineered for high-energy single blows on hard rock. Using them for trenching in soft ground causes blank firing — the piston completes its stroke without resistance — which generates destructive hydraulic shock and rapidly damages the front head assembly.
Consequence
Blank firing damage, front head cracking, accelerated chisel wear
Engineering Rule
Match breaker class to material hardness, not just machine size
Buyer Education
Five engineering principles every equipment buyer should understand before specifying a hydraulic breaker.
How To Choose The Correct Breaker Size
Breaker selection follows a three-step process: (1) confirm excavator operating weight and auxiliary circuit specifications, (2) identify the primary material and application, (3) cross-reference against breaker rated flow, pressure, and impact energy. Weight class alone is insufficient — a 20-tonne excavator running a high-flow auxiliary circuit may support a larger breaker than a 20-tonne machine with a standard circuit.
Engineering Principles
- 1Obtain excavator auxiliary circuit: flow rate (L/min), working pressure (bar), back-pressure limit
- 2Identify primary application: material hardness, confined space constraints, cycle time requirements
- 3Select breaker with rated flow within ±10% of excavator auxiliary output
Why Hydraulic Matching Matters
A hydraulic breaker is a precision hydraulic actuator. Its impact energy is directly proportional to the hydraulic power delivered — flow × pressure. Mismatched hydraulics do not simply reduce performance; they create destructive operating conditions that accelerate component failure across the entire breaker assembly.
Engineering Principles
- 1Under-flow: incomplete piston stroke → reduced impact energy → operator compensates with longer dwell time → blank firing risk
- 2Over-flow: excess velocity through control valve → hydraulic shock → valve and seal damage
- 3Under-pressure: piston does not reach full stroke → energy loss → increased cycle time
Breaker Weight vs Excavator Stability
Attachment weight directly affects excavator stability, particularly on slopes and when working at maximum reach. Most OEMs specify maximum attachment weight as a percentage of operating weight. Exceeding this limit does not simply reduce comfort — it creates genuine tipping hazard and accelerates structural fatigue in the boom and arm.
Engineering Principles
- 1Standard guideline: breaker + bracket weight ≤ 10% of excavator operating weight
- 2Long-reach configurations: reduce maximum attachment weight by 15–25%
- 3Slope work (>15°): reduce maximum attachment weight by additional 10%
Productivity vs Breaker Size
Larger is not always more productive. Breaker productivity is measured in cubic metres of material broken per hour — a function of impact energy, blow frequency, and operator technique. An oversized breaker on a small excavator reduces blow frequency and increases cycle time, often producing lower output than a correctly sized unit.
Engineering Principles
- 1Mini breakers (1–4 t): 400–800 blows/min, optimised for high-frequency light work
- 2Medium breakers (11–20 t): 300–500 blows/min, balance of energy and frequency
- 3Heavy breakers (21–35 t): 200–350 blows/min, maximum single-blow energy
Fuel Consumption Considerations
Hydraulic breaker operation increases excavator fuel consumption by 15–35% compared to digging work, due to the continuous high-pressure hydraulic demand. An oversized breaker forces the excavator engine to work at higher load for longer periods, compounding fuel cost. Correct sizing minimises unnecessary hydraulic demand.
Engineering Principles
- 1Breaker operation: typically 15–35% higher fuel consumption than bucket work
- 2Oversized breaker: engine runs at higher load → additional 10–20% fuel penalty
- 3Correct hydraulic setup reduces pressure losses in lines → lower fuel demand
Application-Based Matching
Breaker selection must account for the material being broken, not only machine weight. Each tonnage class maps to an optimal application envelope.
Best Applications
- Trenching
- Landscaping
- Light demolition
- Concrete breaking
- Utility work
Not Suitable For
- Hard rock quarrying
- Mass demolition
- Mining
Best Applications
- Road breaking
- Foundation work
- Medium demolition
- Frozen ground
- Compacted soil
Not Suitable For
- Hard granite quarrying
- Large-scale mining
Best Applications
- Rock excavation
- Bridge demolition
- Reinforced concrete
- Secondary breaking
- Urban demolition
Not Suitable For
- Micro-trenching
- Precision work in confined spaces
Compatible Excavator Brands
Hydraulic breakers are not brand-locked, but each excavator OEM configures auxiliary circuits differently. Key hydraulic setup notes per brand.
Compatible Ranges
Dedicated H-series breakers matched to Cat excavator auxiliary circuits
Compatible Ranges
PC-series excavators; verify auxiliary flow rate in machine spec sheet
Compatible Ranges
ZX-series; check breaker mode activation in machine controller
Compatible Ranges
EC-series; Volvo uses high back-pressure tolerance — confirm return line spec
Always verify auxiliary circuit specs against the breaker's rated specifications before installation.
Hydraulic Compatibility Notes
Incorrect hydraulic setup is the leading cause of premature breaker failure. These four constraints apply to every excavator-breaker combination.
Excessive Oil Flow Damages Seals
Risk: Seal failure within 200–500 operating hoursOperating above the breaker's rated oil flow accelerates seal wear and causes premature failure of piston seals and dust seals. Always verify the excavator's auxiliary circuit flow against the breaker's maximum rated flow before installation.
Incorrect Pressure Reduces Impact Energy
Tolerance: ±10 bar from rated working pressureWorking pressure below the breaker's minimum rated pressure results in incomplete piston stroke, reducing impact energy by 20–40%. Pressure above maximum rated value causes hydraulic shock and accelerates valve and piston wear.
Excavator-to-Breaker Compatibility Table
Cross-reference excavator brand, operating weight, breaker category, and typical application. Fit ratings reflect hydraulic circuit compatibility and structural suitability.
| Excavator Brand | Operating Weight | Breaker Category | Typical Application | Fit Rating |
|---|---|---|---|---|
| CAT | 1–4 t | Mini Breaker | Trenching, landscaping | 🟢 Excellent |
| CAT | 5–10 t | Light Breaker | Road breaking, demolition | 🟢 Excellent |
| CAT | 11–20 t | Medium Breaker | Rock excavation, demolition | 🟢 Excellent |
| CAT | 21–35 t | Heavy Breaker | Quarry, mining | 🟢 Excellent |
| CAT | 35–50 t | XL Breaker | Heavy mining, mass demolition | 🟢 Excellent |
| Komatsu | 1–4 t | Mini Breaker | Trenching, landscaping | 🟡 Good |
| Komatsu | 5–10 t | Light Breaker | Road breaking, demolition | 🟢 Excellent |
| Komatsu | 11–20 t | Medium Breaker | Rock excavation, demolition | 🟢 Excellent |
| Komatsu | 21–35 t | Heavy Breaker | Quarry, mining | 🟢 Excellent |
| Komatsu | 35–50 t | XL Breaker | Heavy mining | 🟡 Good |
Fit ratings are based on typical auxiliary circuit configurations. Always verify against the machine's hydraulic spec sheet.